^{Menu: Settings → TV/Video Settings}

When opening the menu item TV/Video Settings a new settings window open in which you can change the display settings of Emu64.

Screenshot: TV/Video Settings

Displaying the TV Screen of an old tube television is quite difficult on a modern PC monitor, because the display is much better on a flat screen. The TV/Video Mode settings in Emu64 are changed with horizontal scrollbars.

Saturation

This controler sets the color saturation.
Value 0 = Black/White screen / Value 100 = intense colors

Brightness

This controler sets the screen brightness.
Value 0 = dark screen / Wert 100 = very bright screen

Contrast

This controler sets the screen contrast.
Value 0 = dark screen / Value 100 = very „bright screen“

Horizontal Blur (Y)

This controler sets the screen sharpness.
Value 0 = no effect / Value 3 = blurred to the right (little blur)

Horizontal Blur (UV)

This controler sets the color components.
Value 0 = no effect / Value 3 = color components are mixed.

Phase Shift

This controler shifts the red color difference signal by 180°.
Value 0°= 180° Phasenshift

Every second C64 raster line (of 312 raster lines) is phase shifted by 180°. If the controler is moved towards -45° or 45° the phase shift is distorded.

Scanline

This controler influences the scanlines.
Value 0% = no Scanlines / Value 100% = blurred Scanlines

This function only has an effect when double texture size is actived in the Settings -> Emu64 Settings -> Graphics Settings menu. The double TV Screen display stretches the screen. Every second raster line is dropped and the display is a mixture from the previous rasterline and the next rasterline of the C64 (theoretically weakened by 75%). The 75% can be changed with the controller.

All controllers are set to the default values. This happens on click without another question.

Close the setup window with the close symbol in the upper right . The settings are safed and used.